An introduction to laminated timber

Updated on Solid wood 2024-09-09
1 answers
  1. Anonymous users2024-01-24

    Laminated timber, also known as finger jointed board, finger joint material or integrated board, solid wood laminated timber refers to the narrow and short wood strips are connected with adhesive (some boards are toothed connections), and then transversely widened, sanded on the upper and lower sides of the board. The process of solid wood laminated timber is basically the same as that of solid wood wide panel, but because the material specifications are smaller, there are many splices in the length direction. That is, the board that has been spliced into small pieces of solid wood after deep processing like "finger heads", because the sawtooth interface is used between the boards, similar to the cross docking of the fingers of the two hands, so it is called the finger joint board.

    Because the logs are cross-combined, the combined structure itself has a certain binding force, and because there is no need to stick the surface board up and down, the glue used is extremely small. The length and width of laminated timber: 2440 1220, and the thickness has several specifications in mm

    Cunningham, pine, camphor wood, pine sylvestris, white pine, red pine, catale, hard wood, maple poplar, maple.

Related questions
1 answers2024-09-09

(1) Laminated timber is manufactured from the short material of solid wood into the required size and shape, so that the small timber is used for large use, and the inferior timber is used for better use (2) The laminated timber material is used to remove wood defects such as knots and decay before gluing, so that the material with fewer defects can be manufactured. When paneling, wood defects can be dispersed even if they are still present. (3) Laminated timber retains the material sense of natural wood and has a beautiful appearance. >>>More

1 answers2024-09-09

Advantages: Because there are fewer connections of solid wood joints, the amount of glue used is also less, so the environmental protection coefficient is relatively high. It is easy to process and can be cut, drilled, sawed and formed. >>>More

1 answers2024-09-09

There are oak, paulownia, willow, pine, poplar, elm.

It is recommended that you go to Kyushu to sell the wood industry, they specialize in producing these, cheap and good quality. >>>More

1 answers2024-09-09

It is not the same, the laminated timber is not the bottom plate and the large core board is the core board board, relatively speaking, it can not be said that it is good, depending on the field you use, commonly known as the large core board, which is the most basic material for decoration, which is made of two pieces of veneer in the middle of the sticky splicing board. The price is slightly cheaper than a splint. >>>More

3 answers2024-09-09

It is not made of plastic or plastic steel, etc., and the ceiling is integrated. >>>More