-
Anonymous users2024-01-24Just install a switch directly to expand the port.
-
Anonymous users2024-01-23Yes, the router address in the living room should be changed to be different from the router address of the weak current box, for example, change to or turn off the DHCP server in the living room router, and don't plug the network cable into the WAN port.
-
Anonymous users2024-01-22Yes, but the second one can only be used as a switch, not a TV.
-
Anonymous users2024-01-21The same model as the router is changed to the network segment.
Method 1: The WAN port of the second router is connected to the LAN port of the first router, the wireless names of the two routers are set to be different, and the Internet access mode of the second router is set to automatically obtained, but note that the LAN address of the second router should be set to a different network segment from the first router, for example. >>>More
You need to determine whether you need to re-route the network cable based on the actual situation. >>>More
It turns out that the TP-LANK is always inexplicably disconnected, but now it's okay to use Mercury's, it's okay, the two-day line is 300M, and there is no problem to pass through the wall!
You didn't describe whether the 2 are wireless routes, if they are not wireless routes, please refer to the answer of bubble 690716653, that is the correct solution. If there are 2 wireless, you need to confirm whether WDS is supported, use WDS to bridge! >>>More
It is recommended to buy a 360 secure router 5G, set up a simple and 5G frequency band, which is more practical, and 5G Internet access is really fast, and the price is also affordable in comparison. Signal coverage area, wide air tremor, safe and stable, multi-mode, children's Internet management, free adjustment of WIFI strength, simple setting, support APP remote management.