The shower room can t be sealed by the window on one side, how to solve the problem of keeping warm

Updated on Shower room 2024-09-01
2 answers
  1. Anonymous users2024-01-24

    If you need lighting, you can directly install double glazing, and do not need windows.

  2. Anonymous users2024-01-23

    In this case, you can make a curtain or something to block.

Related questions
What to do if the shower room is by the window on one side, the bathroom shower room covers the wind
1 answers2024-09-01

If there is only one window, you need to make waterproof curtains - the shower room is closed and opened when it is ventilated.

How to block the water from the window on one side of the shower room? One side is just a window sho
2 answers2024-09-01

Your problem is not easy to deal with, if you want to solve it completely, you can only redo the ground, only redo the floor tiles, you must take the floor drain as the center, and find the slope to it. If the shower room is a separate finished floor, it should be your floor drain.

When the bathroom opens the door, one side is the shower room, and the other side is the basin, how
1 answers2024-09-01

The two installation methods are as follows:

If the door is opened to the shower room, the door suction can be fixed and installed on the water barrier at the bottom of the shower room, and of course, the ground door suction can also be installed, commonly known as "ground suction"; >>>More

The shower room has a base, and after it is installed, what should I do if I start to hold water on
1 answers2024-09-01

That is, if you don't adjust the level of the bottom basin, you can tighten the screw feet at the bottom of the shower room high and low, so that the stagnant water can flow at an angle to the drain side.

When installing the shower room, because of the location, one side cannot be covered with glass glue
2 answers2024-09-01

1. If all the glue is not good, you can install the glue strip first, and the other side can be glued. >>>More