Is the location between the hot and cold inlet holes of the bathroom faucet the same?

Updated on Bathroom 2024-09-01
2 answers
  1. Anonymous users2024-01-24

    Hello, the distance between the hot and cold water inlet holes is 15cmThank you!

  2. Anonymous users2024-01-23

    Generally, the left is cold and hot, and the spacing between the elbows is about 15cm, and it can be fine-tuned by 15mm

Related questions
In my bathroom, the kitchen faucets are hot and cold, and the water heater in the bathroom is flat
2 answers2024-09-01

The water that comes out of the cold water valve is normal tap water, and if the water that comes out of the hot water valve is hot or cold, it goes through the water heater.

Bathroom faucets
4 answers2024-09-01

The quality of this faucet is not good, and the soapy water is not flushed, so it becomes like this.

Should the gap between the bathroom faucet and the wall be glued with glass?
1 answers2024-09-01

There is a decorative clasp cover that conceals the gaps. Playing glass glue is also a solution, which is not as good as the decorative buckle cover.

The faucet in the bathroom, which is used to connect the water, is installed on the left side of the
3 answers2024-09-01

If you really believe in Feng Shui, you need to know some basic knowledge about the house, which has a total of 24 mountain directions, and must be surveyed and determined (including the cemetery) and accurate pictures (of the main body of the house and the external environment). >>>More

Bathroom washbasin hot and cold water faucets, both hot and cold water, but the faucet cannot be tur
3 answers2024-09-01

Method 1: Close the main water valve first, and then put the faucet handle with a red and blue mark of about 8 mm, buckle it down, loosen the fixing screw counterclockwise with a flathead screwdriver, take off the handle, use a live wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and take out the ceramic valve core inside. >>>More