What happens to the macular appearance of the newly installed gyplight ceiling

It should be that the gypsum screws are not dotted with anti-rust paint, rust, dig up the yellow place, make up the anti-rust paint, and then take putty ash to make up the paint, or paste a bandage cloth on it, and then paint it.

Gypsum powder is mixed with white latex or polyethylene glue, but there are anti-cracking products on the market that do not need to be adjusted, but the price is relatively high. And the effect is not as good as gypsum powder, fill the gaps after adjusting evenly, and then paste gauze tape on the outside (kraft paper is better than gauze tape, there is a new type of fiberglass mesh belt), and then scrape putty.

Ordinary gypsum board is made of gypsum and paper, only the smell of gypsum and paper, not much used at home, and there is something brushed outside, it must not smell, first exclude. Secondly, the wall is only a thin layer, and there is no smell after the whole house is painted, so it is still excluded. Third, the putty layer is plaster leveling and then scraping putty, these two things have a lime smell, but there is no smell after a little ventilation, and all is fine. >>>More

It is understood that many owners like to use gypsum board to decorate when making ceilings, which is both good-looking and easy to construct, but gypsum board ceilings have a fatal shortcoming, that is, they are easy to crack. So what should I do if there are cracks in the gypsum board ceiling in the living room? Let's take a look! >>>More

Mix white latex or polyethylene glue with gypsum powder, but now there are anti-cracking products on the market that do not need to be adjusted, but the return price is relatively high. And the effect is not as good as gypsum powder, fill the gaps after adjusting evenly, and then paste gauze tape on the outside (kraft paper is better than gauze tape, there is a new type of glass fiber mesh belt), and then scrape putty.