How to deal with moldy ceilings at home

1. If we want to deal with it, first of all, we need to find the root cause of mold before rotting, for example, because there are signs of water leakage or water seepage at the gypsum board, and the humidity is relatively high over time, which will lead to moldy finches on the gypsum board, and it will turn black in the later stage and slowly spread, we can choose a professional mold remover. >>>More

1. Check whether there is water seeping out of the ceiling or corner of the house, find the cause of mold on the ceiling, if it is caused by water seepage or high humidity in the room, you must find a way to solve these problems. >>>More

Sometimes it took a lot of effort to buy back the furniture soon began to mold, this time to pay attention to, the reason for the furniture mold is mainly determined by the indoor temperature, if the humid environment for a long time, the furniture will soon cause mold, this is a certain probability, if you want to make the furniture not moldy, you must keep the room dry, when the mold phenomenon opens the window for ventilation, this has to be good, out of the sun, if it is the rainy season, especially in the southern region often rain and south wind days, The indoor will be damp, so it is necessary to close the window, very serious to turn the air conditioner in the dehumidification mode, you can also turn the air conditioner in the heating mode higher than the current temperature, so that the indoor temperature increases, evaporate the moisture, do not remember not to open the air conditioner for a long time, if there is no air conditioning friends can use a pot of charcoal or put some lime powder in the corner, so that you can also absorb the moisture in the air, the furniture will not be moldy again. Then use a dry towel to wipe the moldy surface clean, and then brush with transparent paint to isolate the surface of the furniture from external influences, so that the mold will not be more serious.

There are two kinds, one is the mold from the inside out that has been eroded and rotted, which is not easy to deal with, and the other is because no one has taken care of it and no one has done it for a long time, due to some dirt on the original sofa (there may be oil, dust, etc.). Treatment method (I have used: 1. Use a vacuum cleaner (replaced with a flat head) to dry suck it up, suck away the mold spores, dirt, etc., and the surface should be thorough. >>>More

Living room plywood ceiling, fan ash after a few years of mold, two eradication, after the re-fan ash, mold, in addition to fan ash, is there any other way?