How to wipe off the latex paint on the integrated ceiling, when decorating, put the integration befo

Soak it with water for a while, then wipe it off with a rag - latex paint is a water-based paint, which can be softened and loosened with water.

Since the top surface is not absolutely flat, if you spray directly, it is easy to cause unevenness! >>>More

The finish of the spray is high, the surface of the roll is rough (the thinner the roll, the less obvious, the finer the drum hair, the less obvious), strictly speaking, it is good to spray, but the difference between the top effect is not very big, the wall will see the effect nearby, the process of spraying requires on-site protection in place, the protection is not in place and it is difficult to clean up, and the top surface can be sprayed, but if the wall needs to be separated, it still needs to be rolled, so it is generally not too differentiated, as long as the paint base is flat, you can.

The latex paint is still rolled well, and it is rolled at least twice.

Lamps and lanterns with their own protective film is the inner packaging plastic film of the lamp, when installing the lamps and lanterns connected to the line and plastic film together on the ceiling, and so on the latex paint brush in the disassembly on the line, the glass shape is protected by newspapers, the edge with paper tape or two-color tape glued to the edge of the modeling, only the latex paint does not get on the modeling, doors and furniture can buy plastic film for crops, this wide, good to protect the door and furniture better, I hope to help you.