-
Anonymous users2024-01-24Surface-mounted radiator installation step 1: lay the pipeline to lay the pipeline according to the pre-designed installation position to determine the pipeline line, the pipeline is generally in the ceiling, baseboard and other hidden places, the laying of the open pipe try not to affect the indoor decoration or occupy too much space. Step 2:
Install the radiator Install the radiator in the process of installing the radiator to place the radiator smoothly, and use a level to measure to see if the installation is stable, and then connect the valve connector with the inlet and outlet valves, and after checking that it is correct, reinforce it with a pipe wrench. Step 3: Install the wall-hung boiler Install the wall-hung boiler The installation of the wall-hung boiler needs to be separated from the open wire and electrical equipment, and flammable and explosive materials cannot be placed around it, specifically, the distance between the wall-hung boiler and the gas meter and the gas stove should be more than 750px.
Step 4: Pressure test and acceptanceStress test and acceptanceThe construction personnel do not have running, running, leaking, dripping, etc. when stamping the pipeline, and they can be accepted after being checked and confirmed by the customer.
It doesn't hurt to sleep with a radiator on your head, but your mouth will be dry when you wake up.
1.Change the position of the radiator - when decorating, if you find that the radiator is on the sofa wall, if it affects the placement of the sofa, it is just behind the sofa and is blocked by the sofa. It is good to move the position of the radiator and set it on both sides of the sofa, or set it in the direction near the balcony of the living room, and block it with curtains, so that the aesthetics are better, and it does not affect the placement of the sofa, and the heat dissipation is better. >>>More
After installing the radiator, a stainless steel plate heat exchanger with high heat exchange efficiency is installed, which not only meets the requirements of heating, but also meets the requirements of hot water bathing, hygienic, energy-saving, and the effect is very good, you can try. Plate heat exchanger heat exchanger heat exchanger heat exchange efficiency is very high, as long as the hot water end circulation is good, there is no need for a high temperature, can still change out the hot water that meets the bathing requirements. Weihai Sanyi HVAC.
It can be changed, but you have to negotiate with the heating company, because the orientation and position of the radiator will affect the heat dissipation or heating effect.
The position of your sofa is not very good, generally the sofa can not be placed in front of the radiator, one is not conducive to the radiator heat dissipation, the other is that the heating temperature is relatively high, there is a certain damage to the sofa! It is recommended that you change the position of the sofa!