-
Anonymous users2024-01-24Take a small suction cup or have a blade to pull it off.
-
Anonymous users2024-01-23Steps to disassemble into a ceiling light:
1. First understand the installation structure of the integrated ceiling. The main bone is fixed on the roof, and the auxiliary keel is connected at the bottom, and the lamp and hanging plate are stuck on the auxiliary keel.
2. You can use a special hanger to suck up and pull out the lamp that needs to be disassembled, and disassemble the power cord of the chandelier.
3. If there is no hanging plate suction, you can use a scraper to pry open the corner of the lamp and slowly remove the lamp.
The hanging plate, lamp and electrical appliances of the integrated ceiling are not fixed by screws, and they are completely stuck by the keel, which is more convenient to install and disassemble.
How do you know what the light is without a picture? The general ceiling vibrillator lamp is fixed on the ceiling with orange screws, and the three buckles on the edge of the orange file shell can be straightened to remove the shell, and then you can see the screws, and the removal is.
1. Turn off the power of the Hui rubber cover When we install and replace the ceiling lamp, if we dig the circuit where the lamp is located. >>>More
There are many kinds of 1, and the hand holds the hood and rotates counterclockwise. 2. There is a small button on the edge of the lamp holder, press it once, or break it left and right. 3. If the lampshade is directly stuck on the lamp holder, it should be warped with a flat mouth. Hope it helps.
= If there is no obvious buckle or fixing nut, you can try to hold the lampshade with both hands and pull it out directly downwards with a little force, because some lamps and lanterns are fixed by the reeds of the base, and you can take it off directly with a little force.
Remove the bulb, find the screw holding the lamp holder in place, and unscrew the screw.