-
Anonymous users2024-01-24The advantage of settling the toilet is that the sewer line can be changed arbitrarily, and the general toilet sewer has toilet sewerage, basin sewerage, and floor drain sewer (two), as long as the above four sewer positions are determined, and then the pipe can be discharged. After the pipe is completed, it can be filled with cement mortar.
-
Anonymous users2024-01-23This should be done according to the design drawings, before making the drainage pipe, we must do a good job of waterproofing, and after doing a good job of waterproofing, we must release the water test for 24 hours without leaking the drainage pipe, and we can do it on the ground after pouring the ground, and we must do it once after pouring the level, so that it will not leak in the future, we must do this.
Need a floor drain, generally have. If you build a house on your own homestead, you can get it. Bricklayers asked.
First, the choice of drainage method.
1. Slope drainage. >>>More
Key points of secondary drainage design of sunken toilet:
1. Backfill height. >>>More
Toilet pressure drainage is nothing more than a sump and then through the way of sewage pumps, or directly through the integrated sewage lifting equipment, in general, sewage lifting equipment is more environmentally friendly, convenient, lower cost, at present, many places in the basement drainage are Zede sewage lifters to carry out.
1. Open holes and install drainage pipes. We first need to make a hole in the main drain pipe in the bathroom, and then install the drain pipe. The mouth of the drainage pipe should be the same height as the original sunken layer waterproof layer, and the other end should be inserted into the main drainage pipeline, and the PVC glue should be used to bond firmly. >>>More