-
Anonymous users2024-01-24The situation you are talking about.
Because the tile absorbs water. Formation. There is no way to deal with it.
Just wait for it to take its own time.
Dry. When it dries completely, the color is uniform... If you don't want to.
This is the case.
It is possible to buy tiles that do not absorb water. This one.
The problem then does not exist.
Of course, the price will be a little higher.
-
Anonymous users2024-01-23Nothing, according to my 10 years of experience in making tiles, it is the normal color difference caused by the different water absorption rate of simple tiles soaked in water, it doesn't matter, use it for a period of time, and wait for the wall tiles to dry, it will be consistent.
-
Anonymous users2024-01-22As for the blue color, it depends on the overall style of your home, and the drinks like blue and brown because they are more resistant to dirt, so you don't need it at home.
-
Anonymous users2024-01-21I do R&D and design work in a ceramic company, and your problem is a common problem.
First of all, you should know what is the price of the tiles you buy, belong to a few lines of quality or miscellaneous brands, most of the fourth-line or miscellaneous brand enterprise product technology is not up to the national standard, or it may be said that they have done some tricks in the selection of blanks in order to reduce costs.
Secondly, you see if you are a wall tile, the living room bedroom floor tile is used as a bathroom brick, because the bricks used in different places are different, like the water absorption rate of the bathroom floor tile is very small, probably
Handling opinions: First of all, you have to confirm whether it is not the cause of the brick itself, "the dirt on the surface of the brick can be cleaned, or the reason for the light".
If not, it is very likely that the sewage in the toilet has entered the embryo body "Tile Density is Not Enough".
Leads you to say that the tiles around the toilet, several are especially deep.
Because the edge of the toilet is very easy to accumulate water, you can also suspect that your toilet has a quality problem and leaks!
-
Anonymous users2024-01-209 years designers recommend ceramic tiles (ceramics) top ten brands.
1.Dongpeng ceramics (medium price, quality OK).
2.Oushennuo ceramics (quality is okay).
3.Mona Lisa ceramics (the price is expensive, the quality is OK) 4Garcia tiles (good value for money).
5.Nobel ceramics (extraordinarily expensive).
6.Hongyu ceramics (quality is OK).
7.Jin Yi Tao ceramics (good cost performance).
8.Special ceramics (quality OK).
9.Eagle brand ceramics (more expensive).
10.New Zhongyuan ceramics (more expensive).
-
Anonymous users2024-01-19The color is not the same, it may not be the same batch of bricks fired by the manufacturer, but you say that the original is the same, there may be water alkali for a long time, or the water will become deeper for a long time.
-
Anonymous users2024-01-18Is it because of the light, there is a shadow of the toilet there.
The first reason is a problem with the plastering layer, and the second is a problem with tile paving. In view of these two situations, we will make the best solution for everyone. >>>More
The reason is that the quality of the toilet is not good, and the firing density of the ceramic is not enough, resulting in more capillaries on the surface, so the dirt will seep in, and it will turn yellow and cannot be cleaned after a long time. We have to check the glaze before buying a toilet and test it ourselves. For example, use a pen to test the glaze, and wipe it with a paper towel after painting to see if the toilet is easy to clean, so that you can test whether its glaze is good.
After the brick is pasted, there will be no such broken corners, or someone has hit it, and the master will definitely not paste the broken pieces when he sees them, you can find the repair of the marble, and some of the repair paint masters are also super powerful, and you can't find where to do it.
The pipes are not smooth, and the toilet users throw paper and sanitary napkins directly into it, and it will be clogged after a long time
It may be that the pipe connected to the S bend of the drain is bent, so the water is slower and cannot be flushed clean. In addition, there is too much hot melt when doing S bend, and the diameter of the check will be reduced after the connection is cooled.