-
Anonymous users2024-01-24The first reason is a problem with the plastering layer, and the second is a problem with tile paving. In view of these two situations, we will make the best solution for everyone.
> plastering layer problem, this situation is that the wall plastering layer has hollowing, sand and other problems, and we did not deal with it before paving the tiles, resulting in hollowing and falling off after the tiles are paved; Observing the falling off situation, we will find that the plastering layer is brought down behind the falling tile, but the tile bonding layer is very firm, which is the quality problem of the base plastering; To give you the recommended treatment plan, we can no longer settle for this situation, we must pave all the tiles removed; Then carefully inspect the base plastering, remove the hollow drum part and re-plaster, and it is also recommended that everyone remove and re-plaster; After the plastering layer is processed, the tiles are re-paved.
> problems with tile paving.
This kind of problem is due to the improper selection of tile adhesives, for example, some home plasterers will be on the wall but choose structural adhesive bonding, which will definitely fall off; If we look at the tiles that fall off due to this kind of problem, we will find that there is no plastering layer on the back of the tiles that have fallen off, and the tile adhesive has fallen off with the tiles, which is caused by the problem of tile paving; This kind of problem is relatively easy to deal with, and the solution for everyone is: first of all, all the tiles should be removed and placed; Then use coarse sandpaper to polish the residue of the wall pasted tile and the residue on the back of the tile; Choose the right adhesive, if it is a plastering layer, choose a cement mortar adhesive, which is sold on the market; It is recommended to choose a thin paste method on the tiles.
> about the problem of bathroom tiles falling off, from the two aspects of base plastering and tile paving, to give you a detailed introduction to the reasons and solutions, I hope to help you, if there are deficiencies, welcome to leave a message to discuss!
-
Anonymous users2024-01-23The hollow tiles in the toilet are caused by the fact that the cement under the tiles is not filled and paved, resulting in the hollowing of the tiles, which will cause the tiles to crumble easily.
-
Anonymous users2024-01-22This is when the decoration workers are laying the tiles, the back of the tiles is smeared with less cement, so when decorating, you must keep an eye on the progress of the workers.
-
Anonymous users2024-01-21The hollowing of the toilet tiles may be caused by the lack of cement under the tiles, or the cement is not smoothed, or the cement is not sticky, etc., which may lead to the hollowing of the tiles.
The reason for the hollowing of tile adhesive.
1.The ground is uneven and unclean. >>>More
There are many reasons for the hollowing of ceramic tiles, such as the unclean treatment of the wall base and the back of the tile, the stains and floating ash, or the wall watering is not moist enough, the tile is not soaked enough with water, the quality of cement mortar is not up to standard, the ratio is improper, and the construction bonding is not solid, but the most important thing is the human factor, that is, the sense of responsibility of the bricklayer.
After the tiles are paved, it is still necessary to pay attention to the ventilation of the windows, especially the rooms on the ground floor and with east windows. Both national and industry standards stipulate that air humidity above 70% must be dehumidified to avoid possible water vapor damage. After paving, it must be accepted within three days. Jinan Decoration Network has relevant information.
After the brick is pasted, there will be no such broken corners, or someone has hit it, and the master will definitely not paste the broken pieces when he sees them, you can find the repair of the marble, and some of the repair paint masters are also super powerful, and you can't find where to do it.
The wall is not properly treated, or the wall is cracked.