-
Anonymous users2024-01-24The full name of melamine ammonia board is melamine-impregnated adhesive film paper veneer wood-based panel. It is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, then drying to a certain degree of curing, laying it on the surface of particleboard, MDF or hardboard, and hot-pressing.
The material of the ammonia board is uniform, there is no dehydration problem, and it will not be deformed by moisture; The ammonia veneer on its surface has the characteristics of moisture-proof, anti-corrosion, wear-resistant, high-temperature resistance, etc., and does not need post-treatment, and the formaldehyde content is low.
Ammonia hydrochloride is a chemical coating, and ammonia board refers to a sheet containing ammonia hydrochloride, which can increase strength. This kind of board is pasted with wood grain paper. It's easy to tell.
The surface of the solid wood veneer is not brushed with ammonia. The purpose of brushing ammonia trihydrochloride is to enhance the shortcomings of low strength of wood grain paper, and the surface is smooth after coating. The solid wood veneer, with a protruding wood texture on the surface.
The surface of the solid wood furniture is also smooth. The surface hardness of the ammonia coating board is very large, which is incomparable to the painting, and can be felt by hand. Ammonia veneer mainly refers to the fact that the surface material is attached to different substrates (particleboard, medium density, plywood), which is called different ammonia board.
For example, ammonia particleboard, ammonia MDF, etc. As a piece of furniture, it is more beautiful, and be careful not to scratch or get blistered.
The polyammonia board can be assembled on site and is mostly used in cabinets, which is more economical, beautiful and environmentally friendly.
-
Anonymous users2024-01-23I agree with the upstairs point of view, I used to make furniture, mainly with hydronamine veneer, which itself has better heat resistance and wear resistance. But you have to choose a better company, because many small workshops are hand-banded, and it is easy to storm the edge after a long time, or the edge banding strip falls off, which is not very good in terms of environmental protection.
Yes, you only need all-purpose adhesive, edge lines, and connectors, etc., and you also need to find a master with better technology. >>>More
The usual carpentry drill can meet the construction requirements without any difficulty, which can be installed by professional carpenters.
The wood of pine is relatively soft and loose, but it is a solid log. >>>More
Then it depends on the substrate. The so-called ammonia veneer is a general term for hot pressing ammonia veneer paper onto MDF or particleboard. The formaldehyde of the general MDF substrate is generally difficult to meet the standard (the price reason, if it is a Daya brand or Aosong board 18 centi board, the price is nearly 200 yuan, 1220 * 2440 * 18mm), so the general particleboard is used as the substrate, if it is used"The particleboard of the "Dew River" brand can still be used as the base material, and the quality of the ammonia trimmer facing paper should be considered. >>>More
It is possible to make furniture on site, but the technology of the construction personnel must be skilled, because the improper construction of the hydronamine board will damage the surface layer and it is difficult to repair, so the tools should also be easy to use during construction.