How to design the dry and wet areas in the middle of the toilet floor drain

Updated on Toilets 2024-09-13
2 answers
  1. Anonymous users2024-01-24

    If the conditions are good, change the water and electricity, and if the conditions are not good, it is a matter of more and less points, and the waterproof bathroom door is still possible. It is better to choose all-copper solid starlight for floor drains.

  2. Anonymous users2024-01-23

    If possible, change the location when doing hydropower.

Related questions
The floor drain of the shower room is in the middle, not in the lowest position, what should I do if
2 answers2024-09-13

Option 1· Elevate other places;

Option 2· Dig the floor drain again. >>>More

Toilet floor drains smell when someone else uses the toilet to flush!
3 answers2024-09-13

The "buckle bell" of the cast iron floor drain is set to form a water seal and anti-odor, but because the production is too rough, it cannot play this role. >>>More

How to deal with the kitchen floor drain in the cabinet against the smell of oil smoke
6 answers2024-09-13

It is advisable to put a few pieces of cut pineapple around it to absorb any odor and it works well.

How to separate dry and wet in the shower between the basin and the toilet
1 answers2024-09-13

Wet and dry separation means separation of dry and wet areas. The definition of dry and wet zones is mainly based on whether the ground will be wet. For example, the shower and bathtub are the wet area; The basin and toilet are the dry area. >>>More

How to design the bathroom to separate dry and wet?
1 answers2024-09-13

Seeing this problem, I helped the landlord quickly draw two pictures. The 2*3 meter bathroom is actually not small in the rigid need house, and the separation of dry and wet is actually relatively simple. There are special needs to achieve three separations. >>>More