Solid wood flooring quality problems

Yes, the installation of solid wood flooring is the main thing, your customer installed the solid wood floor too tightly, did not reserve expansion joints, and it seems that nails were nailed. Even if you lose the lawsuit, it is estimated that your liability is very small. I myself sell flooring in Anhui, and I sell Xinruixin solid wood flooring.

Do you have any responsibility for the installation, you said that he installed it himself, you can let him take it for testing, if he is unwilling, it means that he is still relatively weak-minded, you make sure that there is no problem with your quality, you don't have to worry, or you are more sure.

The things to pay attention to when choosing solid wood flooring are as follows:

The selection of materials varies from person to person.

The type of wooden flooring should be selected according to the economic conditions, the size of the room, the height of the floor, and the length of time to live. Because the long floor and parquet floor can be laid without glue, it is easy to disassemble and assemble when relocating; Short parquet flooring is generally laid by adhesive method, so it is difficult to disassemble and assemble.

The processing size should be precise.

The processing error of the wooden floor should be small, the geometric size should be regular, whether the slats are flat, especially the width direction and the tenon and groove size of the tenon and tenon are more important, generally below plus or minus millimeters.

The board surface is flat and smooth.

There are no obvious knife marks on the front of the good floor, and a little leakage or sawing marks are allowed on the reverse side.

There should be a limit to defects.

The straight lines of the genuine wood board are obvious and parallel, and they must reach "ten no", that is, no knots, no insect eyes, no decay, no obtuse edges, no cracks, no distortions, no twills, etc. In particular, there should be no blunt edges, so as not to affect the pavement.

Strength is adapted to local conditions.

Generally speaking, the higher the density of the wood, the greater the strength and the better the quality, but the price of such boards is also higher. Therefore, the choice of flooring with different strengths can vary depending on the location where it is used. Public places such as living rooms and dining rooms can choose varieties with high floor strength, while bedrooms should choose varieties with relatively low floor strength, such as ash, beech, etc.

Some elderly rooms can choose varieties such as eucalyptus and southwest birch with average strength but very soft and warm.