Why can t the toilet hold water, and then it still leaks

Updated on Toilet 2024-09-13
1 answers
  1. Anonymous users2024-01-24

    You may have two problems with this, 1 may be that your workers have not installed it well, 2 there is a problem with the product itself, you can ask your workers to help you see, they all understand.

Related questions
1 answers2024-09-13

The water tank will leak, it is recommended to repair it or buy a new toilet.

5 answers2024-09-13

First, if it is leaking from the bottom of the toilet after flushing the toilet, and the water is not clear and has a peculiar smell, then it can be basically judged that the sealing ring on the drain pipe at the bottom of the toilet is not sealed, and the sealant on the edge of the toilet and the ground is not tightly sealed. This phenomenon mostly occurs shortly after the toilet is installed. >>>More

8 answers2024-09-13

Pull the card position of the water scoop up and down with water to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, it means that the water scoop equipment is faulty. Remember to press the ladle down a little bit, not too high. If you don't know how to disassemble it, you can dry the water directly in the water tank and clean it with dish soap or laundry detergent. >>>More

6 answers2024-09-13

Pull the card position of the water scoop up and down with water to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, it means that the water scoop equipment is faulty. Remember to press the ladle down a little bit, not too high. If you don't know how to disassemble it, you can dry the water directly in the water tank and clean it with dish soap or laundry detergent. >>>More

1 answers2024-09-13

This is the last time you pressed the water for too long, resulting in the plug not reset, you can press it again, just hear the snap sound to reset.