-
Anonymous users2024-01-24The waterproofing of the bathroom wall is not done, or when the shower is installed, the impact drill penetrates the waterproof layer. But what is the specific situation, let the professionals see, in making a decision on how to repair.
-
Anonymous users2024-01-23You can do it, first use a drop of water brand KS penetrant to fill the seam, dry it and finish the water, almost no change in appearance. If not, high-pressure grouting plugging leakage, with a 4 cm needle for professional toilets. Use 6 drill bits to drill holes (compared to the current 14 drill holes, the trauma is very small), do not damage the tiles, but also achieve the effect of grouting plugging leakage.
High-pressure grouting machine is a waterproof plugging tool, the general machine is produced in Taiwan, entered the Chinese waterproof market in the late nineties, and now the general waterproof company has a waterproof plugging tool, characterized by high efficiency and high success rate. To put it simply, it is only downstairs to use a drill to drill N holes (14 cm rotors, the depth is generally 8 to 10 cm) and then use a special waterproof needle to enter, tighten and then use a grouting machine to grout, when the grouting material enters the hole, it will expand 400-800 times after encountering water, so that it is sealed to achieve the purpose of waterproof plugging.
Tiandi Waterproof Jinhua Branch 137*3895*7797
-
Anonymous users2024-01-22Knock out the bricks and redo the waterproofing, once and for all.
-
Anonymous users2024-01-21Close the valve first, and then find the leaking water pipe in the wall to deal with it.
You don't need to look at it to know that the waterproof is not in place, and the water begins to seep through from the weak point, and if there is more, it will expand! Re-hook the crack in that wall and spray it with silicone liquid, and it may be solved! Provide free professional technical consultation for concrete waterproof leakage repair.
It should be a problem with the water pipe, it is estimated that you have to pry the bricks, get the water pipes well, remember to make sure to pry the part of the bricks again after you do the waterproofing, in the bricking, choose a good point of waterproofing, you can directly paste the brick after doing it, Ruifeng's waterproof is good, cost-effective.
Water seepage on the bedroom wall of the bathroom partition wall may be a rupture of the water pipe installed in the bathroom partition wall, or a problem with the joint, resulting in water leakage in the partition wall between the bathroom and the bedroom.
As long as there is a place, it is absolutely necessary to install the mop floor, mop the floor to wash the mop, and pour dirty water can be used.
First of all, you need to confirm whether it is a leak in the pipe, a failure of the waterproof layer, or both, and in rare cases, it is a leak from the upper floor. >>>More