How high are the bathroom tiles

Generally, it is best to paste the tiles near the washbasin and shower room to a meter height. However, it is recommended that the bathroom can be fully tiled to the ceiling, which is the best. In the middle, you can also do some waistline treatment, so that some changes are also more beautiful.

You can choose some light-colored tiles in the bathroom, and by the way, I remind you that the bathroom must be waterproof.

It is best to paste all the tiles to the ceiling, and you can do some waist line treatment in the middle, so that some changes are more beautiful. By the way, it is very important for the bathroom to be waterproof, and the general shower area should be 180cm, which can also be reached to the top; If there is a bathtub, the wall adjacent to the bathtub should be 30cm higher than the upper edge of the bathtub, and the rest of the walls should be 30cm. In addition, if the sink is attached to the wall, it is best to make the adjacent wall waterproof. Hope it helps!

meters, but still according to the height of your window, generally cover the top of the window, if it is too high, the bath bomb is too high in winter, and it will not be warm enough.

First, the bathroom tiles can be all tiled to the ceiling is the best, and the middle can do some waist line treatment, so that some changes are better. It is very important to make the bathroom waterproof, and the general shower area should be 180cm, which can also be reached to the top; If there is a bathtub, the wall adjacent to the bathtub should be 30cm higher than the upper edge of the bathtub, and the rest of the walls should be 30cm. In addition, if the sink is attached to the wall, it is best to make the adjacent wall waterproof.

Second, the quality problems that should be paid attention to in the construction of bathroom tiling.

1. Hollowing and falling off.

1) Due to the influence of temperature.

2) The surface deviation of the base layer is large, the base treatment or construction is improper, such as each layer of plastering is too tight, the ceramic mosaic brick hook is not strict, and there is no sprinkling maintenance, the bonding strength between the layers is very poor, and the surface layer is easy to produce hollowing and falling off.

3) The mortar mix ratio is not accurate, the consistency control is not good, the sand mud content is too large, on the same construction surface, several different mix ratio mortar is used, so that different dry shrinkage will also cause hollowing. It should be carefully operated in accordance with the process standards, pay attention to the grassroots treatment and self-inspection work, and rework and repaste the empty drum if it is found. The whole room or individual parts should be completed at one time.

2. The seam bar and pressure bar are not tight and straight: the position line should be elastic during construction, and the seam of the cover panel should be straight and the seam should be close to the cover panel.

This should be a relatively simple problem of water seepage on the wall. It must be that the waterproofing of the house is not done well, and the water will seep if it is not in place.

There are several possibilities for this situation: 1. The waterproofing of the upstairs bathroom is not done well, and it leaks down along the inner wall, but this situation should appear more in the ceiling. It is rarely seen on low walls.

2. There are hidden dark water pipes in the wall, and there are cracks in the water pipes, and water seepage occurs.

3. The waterproofing of the bathroom is not in place, the waterproofing of the wall and the ground is not done well, and the waterproof layer is damaged, resulting in water seepage.

The vast majority of the bathroom leaks to their own home, it is useless to treat the whole surface, only to ensure that the entire ground is completely free of water can penetrate into the mortar layer below the surface of the tile, there will be no water seeping into the damage of the waterproof layer, so that the problem of water leakage is solved.

You can buy paint to plug leaks and waterproof, and paint the walls and floors of the bathroom by yourself; The best thing to do is to ask a renovation worker to solve it, which is more effective.