Home decoration bathroom waterproof, is it better to lay polypropylene cloth, or to lay tapered clot

The area of the bathroom is relatively small, there are many pipes, if the polypropylene membrane is used, it is not easy to cut and paste, and there will be a pungent smell, which is not very environmentally friendly indoors. The cement-based coating is a waterproof material that has both high elasticity of synthetic polymer materials and good durability of inorganic materials. Environmental protection is good, there is no pungent smell, waterproof cement-based coating is relatively simple, and it also has good flexibility, so the cement-based coating for waterproofing in the bathroom is better.

Good with wall tiles. Whether it is polypropylene storage or non-woven fabric, it is pasted to the wall with glue or paste, and the bathroom is damp and will often fall off.

If the bathroom is a waterproof layer, it is recommended not to use membranes, and the area of the bathroom is small, only about 100 square meters. If you use coil construction, there is no guarantee that there will be no leakage in the future. Because the coil should be lapped, the coil will leak everywhere if it leaks a little. >>>More

Regardless of whether the tiles are dry or wet, they actually have no effect on the waterproofing of the bathroom. As long as the bathroom waterproofing is done in accordance with the requirements of the standard, then no matter which method is used, there is no problem with tiling. The bathroom is waterproof, the standard requirement is that the ground needs to be done, the wall should be at least meter, it is recommended to do the full height, if it is a lightweight wall, then it must be done full height. >>>More

First of all, don't use polypropylene to do it, it will inevitably leak, and it will be smashed and redecorated when the time comes. >>>More