-
Anonymous users2024-01-24Generally, the water test is started after two days, and the time to test the water is the same as two days, and the amount of water released is as much as possible.
-
Anonymous users2024-01-23Test the water after 48 hours to 72 hours, test the water for no less than 24 hours, remember to do not open the windows in the house for ventilation, and the slow-drying cement will not crack.
-
Anonymous users2024-01-22Look at the ventilation conditions, and dry it when you touch it.
-
Anonymous users2024-01-21In general, after the waterproofing is done, the water storage test can be carried out after 24 hours, and the water storage test can be observed every 6 hours, and it is generally observed 4 times, that is to say, after 24 hours of water storage, see if there is any leakage, and then you can do the water test or observe it after the rain to see if the drainage is smooth and whether there is water accumulation.
-
Anonymous users2024-01-20Do a 48-hour closed water test 24 hours after the toilet is drained to check whether there is water leakage downstairs!
After the bathroom is waterproofed, it needs to be thoroughly dried, so that it can do the closed water test, you can contact the residents downstairs in advance, so that the leakage can be informed in time to avoid unnecessary losses of the downstairs residents When doing the closed water test, the depth of water storage can not be less than 20 cm, and the time can not be less than 72 hours, and the water level does not fall is qualified.
After doing the waterproofing, it is caused by testing the water without drying it thoroughly, and in such a situation, it is best to do the waterproofing again.
After the bathroom is waterproofed, it needs to be thoroughly dried, so that it can do the closed water test, you can contact the residents downstairs in advance, so that the leakage can be informed in time to avoid unnecessary losses of the downstairs residents When doing the closed water test, the depth of water storage can not be less than 20 cm, and the time can not be less than 72 hours, and the water level does not fall is qualified.
Check what is the cause of the leakage, if the pipe is broken, change one, if the waterproof layer is not done well with the kind of efficient liquid penetration crystalline waterproof material, can penetrate into the concrete inside, but it can not be managed for a few years, if the waterproof layer is not done well during the decoration, the later maintenance is very troublesome, it is best to knock the brick and redo the waterproof to reduce the later maintenance. First find a professional to see what the reason is to solve the specific problem. >>>More
1 is all Js waterproof coatings, divided into powder and liquid materials, more than 3 brushes are better, nothing complicated.