-
Anonymous users2024-01-24Indoor wires are generally threaded into the concrete, if you want to change the lamp position need to be grooved on the top surface, and it is not very laborious to hang a gypsum ceiling with a little arc on the side.
-
Anonymous users2024-01-23If there is a ceiling, there is no need to slot, directly thread the pipe, if there is no ceiling, it is necessary to groove, if the concrete is too hard, you can also use the yellow wax pipe to route, so that the groove can be shallow.
Such a situation is more common in home decoration, but it is not right to directly fix the wire in the trunking with gypsum powder putty.
It depends on whether you are looking for a person or a team or the introduction of a gypsum line shop, in addition, this question is more general, is it an angular line or a flat line, a pattern, a width, etc., and then it is difficult to have a satisfactory answer to such an important information as a question, and the general contractor and material are about 10 yuan a meter Jialiang gypsum line mold.
Of course, you can use light steel keel with gypsum board, and now on the market, including hotels, shopping malls, many special-shaped roofs are made of gypsum board, but you should choose better brands of gypsum board, such as Knauf, Lafarge, Jack These brands, the relative quality is relatively excellent. >>>More
The harder thing was scraped with the plaster first, then wiped with a damp towel, and then wiped with a newspaper.
Precautions for wiring within the ceiling of a building:
Wires should not be laid on paper ceilings and should not enter the ceiling; >>>More