-
Anonymous users2024-01-24Now have done a good job of testing the water does not leak, but can not guarantee that it will not leak in the future, do a secondary drainage when changing the drainage before laying the bricks, even if the bricks are paved after the leakage is fine, try the drain with a bucket of water poured around the side to see if there is a collection of water, whether the water flows to the floor drain.
Yes, do cement mortar leveling after finishing, so as not to break the waterproof layer when tiling.
It depends on how many square meters you have, more than 500 square meters of about 4 yuan, if there is a bathroom, it is estimated that you will have to pay 100 yuan!
Brush the waterproof paint for the first time. Before construction, ensure that the construction site is clean and dry, and the waterproof coating should be coated with no omission, firmly combined with the base layer, no cracks, no bubbles, and no falling off. The coating height is consistent, and the thickness should meet the requirements of the product. >>>More
In this case, it is best not to use other waterproof coatings to prevent reactions. If it is leaky, it is recommended to unplug the waterproof of the big brand, which has a good waterproof effect, saving worry, effort and money.
It needs to be painted twice.
Bathroom waterproofing process: >>>More