-
Anonymous users2024-01-241. Be sure to come before installation.
Know where the furniture is placed.
to prevent the installation from being too large and cannot be moved.
2. When installing, the bottom of the accessories must be padded soft.
DAO soft cardboard or cotton cloth and other anti-friction materials. so as not to damage furniture or floors.
3. All hardware accessories should not be placed scattered to prevent loss or damage to wood products such as furniture and flooring.
4. Be cautious before putting on screws or knocking nails. Check whether the screw length is appropriate and whether the furniture splicing part is correct. Prevent rework from affecting the overall aesthetics.
5. When installing, if you need to move the existing furniture or items, please ask the owner for approval.
6. When you find that your home has a small flaw, you should communicate with the master in time.
7. After installation, check again and again whether all the connectors are installed correctly, and whether the connection parts are fixed and intact, and there is no forgetting.
8. After installation, all garbage should be cleaned up, the position of all moved items should be restored, and carefully checked whether it is correct.
9. Before you need to punch holes in the wall, you should determine whether there are wires and water pipes at the location where you need to punch holes to prevent an uncontrollable situation.
10. When opening the hole, use a vacuum cleaner and other tools to catch the dust to avoid dust flying all over the sky.
11. If it is an opening on a tile or other fragile goods, do not damage the tile. Before opening, check whether the tile of the hole must be opened, 90% of the hole will be broken, and it is best to replace the opening direction.
12. When installing any item, you must not directly step on the heavy pressure on the item.
-
Anonymous users2024-01-23What to pay attention to when disassembling furniture:
1. When purchasing, you should also pay attention to whether there is a match.
Manual, whether the relevant parts are complete, whether the size and thickness of the plate meet the standards, whether there are defects in the joints, etc.
2. Improper installation and uneven stress of the plate will lead to the deformation of the furniture. There is still room for development, and consumers should be cautious when using it.
3. It is necessary to prepare a set of commonly used tools and knives at home. In particular, furniture that always needs to be moved should always check the joints for signs of loosening, and tighten them immediately once found; Some furniture is connected by plastic parts, which are easy to be deformed by the environment and cause loosening, so it is best to purchase some spare parts in advance so that they can be replaced at any time.
4. It is better to hire professionals or carpenters to disassemble and assemble furniture, because they are more familiar with the structure of furniture and how to protect it. Do-it-yourself may break the paint surface of the furniture.
-
Anonymous users2024-01-22When moving furniture disassembly and installation, do you know the precautions for furniture disassembly and assembly?
I believe that many people after buying furniture home, the installation of furniture to pay attention to the problems and details is not very clear, the following is your furniture needs to be installed and disassembled when the problems and details to pay attention to, I hope to help you:
1. Furniture mall: Usually after the mall buys back the furniture, the mall will arrange the furniture installer to install it on the same day or the next day, when the installer opens the package, please note: the furniture plate you want to install has not been scratched by the blade; Pay attention to the installer's attention when installing accessories:
If there are holes in the board, the installer has not helped you install the wooden tree, which is very important! Wooden tsubaki is the key to fixing and accepting greater weight!
Second, when the furniture is to move to the second place: now there are many people who need to move after buying a new home, at this time most of them will let the moving company to complete, however, you should pay attention to: the moving company's disassembly and assembly of furniture personnel is not a professional furniture installer, I believe that there are many people who have moved to understand that their furniture is still shaky after the second place is installed, some plates are incomplete or rotten, and some accessories are not known whether they are installed, it is recommended that you find a professional furniture installer to complete the furniture installation.
3. Inspection method after the installation of furniture:
1. Door and door gap: the door is flush, and the door gap is equal, and the door gap is generally not more than that.
2. Pull of the door and drawer keyboard: smooth, no noise, no tilting.
3. Track: parallel, no wire cap protruding and smooth.
4. Laminate: the positive and negative directions are correct and reasonable.
5. Accessories: complete, good, not missing, moderately tight.
6. Overall structure: stable and not inclined or loose.
7. Overall appearance: no damage, no collision, no obvious quality problems.
-
Anonymous users2024-01-21Furniture disassembly and copying must have relevant experience, otherwise bai can be dismantled and can not be pretended to cry without tears.
1. Before installation, you must know the location of the furniture to prevent it from being moved due to excessive volume after installation.
2. When installing, the bottom of the accessories must be padded with soft cardboard or cotton cloth and other anti-friction materials. so as not to damage furniture or floors.
3. All hardware accessories should not be placed scattered to prevent loss or damage to wood products such as furniture and flooring.
4. Be cautious before putting on screws or knocking nails. Check whether the screw length is appropriate and whether the furniture splicing part is correct. Prevent rework from affecting the overall aesthetics.
5. When installing, if you need to move the existing furniture or items, please ask the owner for approval.
6. When you find that your home has a small flaw, you should communicate with the master in time.
7. After installation, check again and again whether all the connectors are installed correctly, and whether the connection parts are fixed and intact, and there is no forgetting.
8. After installation, all garbage should be cleaned up, the position of all moved items should be restored, and carefully checked whether it is correct.
9. Before you need to punch holes in the wall, you should determine whether there are wires and water pipes at the location where you need to punch holes to prevent an uncontrollable situation.
10. When opening the hole, use a vacuum cleaner and other tools to catch the dust to avoid dust flying all over the sky.
11. If it is an opening on a tile or other fragile goods, do not damage the tile. Before opening, check whether the tile of the hole must be opened, 90% of the hole will be broken, and it is best to replace the opening direction.
12. When installing any item, you must not directly step on the heavy pressure on the item.
When disassembling any office furniture, it is important to disassemble it according to its own track and design. If it's that kind of drawer, be sure to remove it and then remove it. Moreover, in the process of disassembly, we must pay attention to the accessories of the interface part, and do not pull hard. >>>More
Material Trap When consumers buy furniture, they wonder why the price is so far apart when the appearance and style of furniture look like no obvious difference? In fact, there is a big difference in the materials used in furniture production, and some manufacturers have a lot of traps in the furniture production process of cutting corners and stealing beams and columns, which need to be carefully identified to be recognized. The use of inferior substrates The use of substrates that are not dried and moth-eaten will have a high moisture content of such furniture, which can easily cause deformation or cracking after the finished furniture. >>>More
In recent years, the demand for moving has gradually increased, and more and more moving companies have appeared in the market. The price of the moving company also varies. When moving, many friends often encounter the situation that because a certain furniture is relatively large and cannot be moved, they need to charge relevant furniture disassembly and assembly fees, resulting in a price increase halfway. >>>More
1. When disassembling and assembling furniture, we need to use some tools, such as a word, a Phillips screwdriver, pliers, hexagonal wrench, hammer and so on. >>>More
If you are not too familiar with it, each board needs to be marked and disassembled before disassembly!