-
Anonymous users2024-01-24LED ceiling light installation.
1. First unpack the ceiling lamp in front of the customer, then check whether the surface of the ceiling lamp is damaged, test whether the lamp can be started normally with the pliers of the test circuit, and then remove the base and remove the little thread that comes with it.
2. Remove the bulb or LED tube on the base.
3. Then press the base on the position that needs to be installed (reserved power cord), and then mark the screw holes that need to be installed with a marker pen.
4. Then according to the marked hole position, use an electric drill to punch a hole at the top.
5. After punching the hole, it should be driven into the hole with an expansion bolt or rubber plug.
6. Put the base in line with the hole, and then fix the base on the ceiling with screws.
7. Then wire, connect the reserved power cord with the power supply of the lamp.
8. Then install the LED tube back into the base of the lamp, and then try to power on to see if the lamp can operate normally.
9. After making sure that the lamp can be used normally, install the lampshade.
-
Anonymous users2024-01-23This master can try to use our LED line lights on your furniture, which is easy to install without punching holes.
-
Anonymous users2024-01-22If you don't know how to install, you can find some masters on the home installation platform for installation, and you can find it on Luban Home.
-
Anonymous users2024-01-21LED light installation is not very difficult nor very simple, it is recommended not to install it yourself if it is not very professional, after all, safety first, my previous lamps and lanterns are installed on the Luban home platform to find a master,
Living room decoration: The living room is the place where the family has the most activities, and the decoration must use LED, which is conducive to the health of the family and is very energy-saving and cost-saving. The living room generally needs to be equipped with ceiling lamps + spotlights (ceiling lights) + light strips, which are clear at a glance in the above picture. >>>More
There is harm, because the light source of LED lamps is direct, so many manufacturers of LED lamps have to make a lampshade similar to astigmatism to expand the projection area of light, if it is close to the eyes, it is recommended to install a translucent lampshade, but generally do not look directly at the light source, because the light is relatively strong, it is still not good for the eyes.
There is no necessary connection between hanging the ceiling and installing LED lights; The ceiling is integrated into the mosaic, and the ceiling lamp or chandelier is not suspended. All kinds of lamps and lanterns have a variety of light sources for you to choose according to your needs, which is very convenient.
It can be adopted, preferably with lamps with isolated constant current LED power supply, safely.
However, it can't be hung too low, the general family design ceiling is to cover up the beam of the roof, if the ceiling is too low to accommodate the beam of the roof, it is not suitable in terms of house culture or design. Generally, the height of the residential floor is about one meter, and if the top of the living room is decorated with a suspended ceiling, the design is slightly improper, and it will look depressing. Generally, the design of the ceiling in the family is to cover up the beams of the roof, if it is lowered, it will make people have a strong sense of oppression that the sky is falling, which will have a negative psychological impact on the occupants. >>>More