What ingredients can be added to the paint of furniture to make it brighter and smoother

Updated on furniture 2024-09-02
1 answers
  1. Anonymous users2024-01-24

    The gloss of the paint is an indicator, and the scratch resistance of the paint is another indicator.

    Gloss has a close relationship with the solid content of the paint, good paint, such as; Low viscosity and high solids, resin 65 solids, the viscosity is very low, no thinner can be added, and the difference between wet film and dry film is very small after spraying. No solvent evaporation. In this way, the gloss is high.

    I don't know if I can understand it. (The paint is used in the last solid, the solvent is volatile, and some paints seem to be very thin, but in fact the solid content is very high.) There are also paints that look very dry, but in fact have a very low solids content).

    Scratch resistant; It is to add anti-scratch additives, and there are also wax additives, which are used more in matte paint, which seems to affect the luster, and after adding anti-scratch additives, the nails will scratch the paint surface, and there will be a slippery feeling.

Related questions
6 answers2024-09-02

Furniture paint is composed of three basic components: film-forming substances, secondary film-forming substances, and auxiliary film-forming substances. >>>More

1 answers2024-09-02

Hello landlord Nowadays, furniture is generally calendered paint, which is not luster in the first place, and it is counterproductive if you deliberately pursue brightness. You can use a soft cloth dipped in a spray (Bi Lizhu) to follow the grain of the wood to wipe the furniture. There is no need to deliberately go for regular maintenance. Thank you

1 answers2024-09-02

General hard miscellaneous wood can be, solid wood itself is very durable, hard miscellaneous wood is more durable, such as white oak and red oak, oak, ash these are very good, all belong to hard miscellaneous wood, no problem.

5 answers2024-09-02

Do you want to be shiny all ?

It should be quite difficult, but if it was only partial, it would be possible. >>>More

3 answers2024-09-02

Before making lacquer, the sanding process was not refined enough.