Where is the water saving toilet design

1. Pneumatic water-saving toilet. It is to use the kinetic energy of the inlet water to push the impeller to rotate the compressor to compress the gas, and use the pressure energy of the inlet water to compress the gas in the pressure vessel, and the gas and water with higher pressure first flush the toilet strongly, and then flush it with water to achieve the purpose of saving water, there is also a float valve in the container, and the float valve is used to control the water volume in the container not to exceed a certain value. >>>More

First, choose a water-saving toilet Flush siphon toilet is a water-saving toilet with a good water-saving effect. When choosing whether the toilet is water-saving, the first thing to make clear is that the "water-saving certification" issued by non-governmental organizations is unreliable and authoritative. Because the state currently does not have compulsory certification for water-saving toilets. >>>More

Product functions: 1. Provide the most suitable stable water flow for the bucket, efficiently save water and improve water comfort; 2. Distribute the flow, reduce the pipe diameter, and save construction costs; 3. Simplify the pipe diameter. >>>More

Two possibilities.

The first one bought a fake. >>>More

The fittings on the left are for water intake, the pipe leading to the device is used to replenish the water trap, and the fittings on the side should be equipped with 2 kinds of devices to open the black rubber ring, 3 liters and 6 liters 2 kinds, the punch of the toilet depends on the amount of water flushed, and the structure of the toilet itself, from the picture can only understand so much I don't know if it will help you.