-
The toilet toilet has less hydraulic power because the hole spacing is not suitable for displacement, or there are two reverse bends, one for the toilet and one for the sewer pipe.
If it is because it is a long time later, one is that the sewer pipe is not good and may be blocked; One is that there is dirt inside the water tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling. If it is within the warranty period, it is recommended to find the manufacturer to test it and solve it according to the actual situation.
-
The side link type will hook the hook short point chain, and the upper pressure type will make the pressure rod on the inner surface of the cover longer, remember to tighten the lock nut at the end.
-
It's a problem with the toilet tank floating, turn it up higher. There is a lot of water storage. The flush pressure will be high. But some water will be wasted.
-
You can only raise the water level of the tank, and there is no other good way.
First flush the toilet with a basin to see if the toilet can drain normally and the size of the drainage, if the manual drainage is normal, the drainage strength is very large, it proves that the toilet exhaust system is normal. >>>More
1. Dredge the pipeline, and it is also necessary to expand the diameter of the pipeline; 2. If the water pressure is not enough, you can consider installing a booster pump next to the toilet;
You can use a shifter, according to the empty distance of 10 cm, the ground is partially heightened, and the PVC elbow is used to change the distance between the drainage holes or directly install a squatting toilet. >>>More
Hello, the toilet bowl you encountered is slow to drain, if you haven't used it before, you can almost certainly have a slight blockage. >>>More
Fill a bucket with some water and use it to flush the toilet! >>>More