Shower room hardware is good, please, thank you

Stainless steel is good, and it should be marked with stainless steel above 204, you must know that the shower room is a high temperature and high humidity environment, and stainless steel parts and aluminum alloy parts below 204 are easy to rust.

1. Most of the furniture factories do not produce hardware, and they are purchased from manufacturers specializing in the production of furniture hardware! >>>More

The handle, lever, hinge and other accessories of the shower room can not be ignored, because if the tempered glass has a small corner damage the whole glass will automatically burst, the high-grade shower room pays great attention to the adjustment function design of the shower room in terms of structure, such as the shrinkage wall groove has the function of vertical and horizontal direction adjustment, can correct the deviation caused by the wall and the installer. Its hardware accessories are mostly copper fittings and stainless steel fittings, with 304 stainless steel being the best. An important factor affecting the quality of copper fittings is the quality of electroplating, all the electroplating parts (including plastic parts) in the shower room must ensure seven layers of electroplating, the first layer of alkali copper, the second layer of rubber-plated copper (with the world's best South African imported copper), the third layer of acid-plated copper (plating three layers of copper of different properties, the purpose is to clean many times, and trim and fill the tiny pinholes on the surface of the copper parts), the fourth layer of semi-bright nickel plating, five layers of all-bright nickel plating, six layers of nickel plating front, (because the surface of nickel this element is honeycomb-like, It must be coated with two layers of nickel with different properties to correct the concave points with each other, so as to avoid quality problems such as black spots and pinholes on the surface of the product); The seventh layer of chrome plating to prevent corrosion keeps it bright, improves hardness and wear resistance, and the surface is treated with electric paint, which is more wear-resistant and not easy to scratch people. >>>More

The list of materials is about 100 kinds: upper and lower aluminum tracks, left and right side column aluminum, fixed glass, movable glass, up and down slower wheels, magnetic strips, water retaining rubber strips, handles, positioning particles, connecting screws, aluminum port decorative covers, frameless shower room: hinges, wall yards, ground yards, pull rods, fixed sleeves, some products also have hinges, if you want to involve this line, slowly understand, different products of the shower room have different materials, but the main material is several (aluminum, glass, hardware, plastic parts).

The handle, lever, hinge and other accessories of the shower room can not be ignored, because if the tempered glass has a small corner damage the whole glass will automatically burst, the high-grade shower room pays great attention to the adjustment function design of the shower room in terms of structure, such as the shrinkage wall groove has the function of vertical and horizontal direction adjustment, can correct the deviation caused by the wall and the installer. Its hardware accessories are mostly copper fittings and stainless steel fittings, with 304 stainless steel being the best. An important factor affecting the quality of copper fittings is the quality of electroplating, all the electroplating parts (including plastic parts) in the shower room must ensure seven layers of electroplating, the first layer of alkali copper, the second layer of rubber-plated copper (with the world's best South African imported copper), the third layer of acid-plated copper (plating three layers of copper of different properties, the purpose is to clean many times, and trim and fill the tiny pinholes on the surface of the copper parts), the fourth layer of semi-bright nickel plating, five layers of all-bright nickel plating, six layers of nickel plating front, (because the surface of nickel this element is honeycomb-like, It must be coated with two layers of nickel with different properties to correct the concave points with each other, so as to avoid quality problems such as black spots and pinholes on the surface of the product); The seventh layer of chrome plating to prevent corrosion keeps it bright, improves hardness and wear resistance, and the surface is treated with electric paint, which is more wear-resistant and not easy to scratch people. >>>More