How to install a toilet in the bathroom

The toilet can be said to be one of the most important sanitary ware in the bathroom, and most people ask professionals to install it. Here I will introduce you to the installation method of the toilet!

1. The drain is required to be handled by the installer smoothly, and the bottom outlet of the toilet should be equipped with a special flange for the toilet, or the glass glue should be applied evenly with the drain, and the bottom and surrounding of the toilet should be glued, and the gap between the toilet and the wall should be even, placed properly and steadily.

2. After the toilet is in place, it is required that there is no leakage in the water intake, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is stable.

3. Nowadays, the installation of the toilet is generally not equipped with anchor screws, but the reserved hole on the toilet should be blocked with glass glue to prevent the smell.

4. If you need to install anchor screws, first use the special sealant installed in the toilet, evenly apply it at the periphery of the drain outlet of the toilet base 2CM, the drain of the toilet should be facing the center of the drainage pipe, draw the position of the expansion bolt on the left and right sides of the toilet, take the toilet, punch the hole, and bury the expansion bolt.

5. At the intersection of the toilet and the periphery of the ground surface, because the toilet and the surface are not integrated, you can use the grout transparent sealant to stir to seal the outer mouth of the toilet and keep it integrated with the ground surface, and you can also block the local toilet water on the periphery of the toilet.

6. After the toilet is installed, it should wait until the glass glue (putty) or cement mortar is solidified before it can be used with water, and the curing time is generally 24 hours.

7. Install or debug the water tank accessories. Check the water pipe first, drain the water for 3-5 minutes to flush the pipe to ensure the cleanliness of the water pipe, then install the angle valve and the connecting hose, and then connect the hose with the installed water tank accessories water inlet valve and press the water source, check whether the water inlet and sealing of the water inlet valve are normal, check whether the installation position of the drain valve is flexible, whether there is jamming and leakage, and check whether there is any leakage and install the water inlet valve filter device.

The installation method of the toilet is introduced, in fact, it is not difficult, as long as you master the technical points you can easily get it.

Installers know what to do, and that's not something to worry about.

Toilets are generally purchased according to the size you reserve when you are renovating. The merchant is responsible for the installation of the toilet when you buy it, and if you replace the toilet yourself, you can ask a professional master to help.