-
According to Article 5 of the Administrative Measures for Residential Interior Decoration, the following behaviors are prohibited for residential interior decoration activities:
1. 32313133353236313431303231363533e4b893e5b19e31333433626437) without the original design unit or the design unit with the corresponding qualification level to put forward the design plan, change the main body of the building and the load-bearing structure;
2) Changing rooms or balconies without waterproof requirements into bathrooms and kitchens;
3) Expand the size of the original doors and windows on the load-bearing wall, and remove the brick and concrete walls connecting the balconies;
4) Damage the original energy-saving facilities of the house and reduce the energy-saving effect;
5) Other behaviors that affect the safety of building structure and use.
Article 6 stipulates that decorators engaged in residential interior decoration activities shall not engage in the following acts without approval:
1) Erection of buildings and structures;
2) Changing the façade of the dwelling, opening doors and windows on non-load-bearing exterior walls;
3) Demolition and alteration of heating pipes and facilities;
4) Demolition and modification of gas pipelines and facilities.
The acts listed in item (a) and (b) of this article shall be approved by the competent administrative department of urban planning; (3) acts, shall be approved by the heating management unit; The act in item (4) shall be approved by the gas management unit.
-
Try to walk on the wall and top of the circuit, not on the ground! The water pipe is slightly better, and those who have an economical basin can choose to go to the wall or all to the top,!!
-
Hydropower topping is the most standardized.
Home decoration kitchen, bathroom water and electricity renovation specifications:
1. Waterway part.
-
Hydropower is the most reasonable to go from the top, which is convenient for later maintenance, but the cost is relatively high. Walking from the ground is relatively cost-effective but unreasonable. The specification must be horizontal and vertical, electric and underwater.
-
To be horizontal and vertical, the best to go to the top, do not destroy the original waterproof, do not transversely slotted too much, after the construction to remember to do the closed water test, but also to draw the hydropower walking direction map. This is very necessary, oh, to avoid hitting when installing things in the future, if you think it is troublesome to draw, you can take pictures with a camera, and indicate the size on the computer. Minimize damage to walls and waterproofing.
-
It is recommended to go from the top, so that the conduit is perpendicular to the socket for easy memory later, the waterway should be below the top space circuit, and the water pipe should also be vertical. This makes it easy to repair or retrofit later!
-
It depends on the specific situation The water generally depends on where you need the water outlet to run Most of them are on the wall.
When laying wires, you must pay attention to let the decorator put a protective pipe on you The general water circuit can run clearly and neatly Don't run around the line when running in circles Just run crookedly.
-
According to Article 5 of the Administrative Measures for Residential Interior Decoration, the following behaviors are prohibited for residential interior decoration activities:
A) without the original design unit or the design unit with the corresponding qualification level to put forward the design plan, change the main body of the building and load-bearing structure;
2) Changing rooms or balconies without waterproof requirements into bathrooms and kitchens;
3) Expand the size of the original doors and windows on the load-bearing wall, and remove the brick and concrete walls connecting the balconies;
4) Damage the original energy-saving facilities of the house and reduce the energy-saving effect;
5) Other behaviors that affect the safety of building structure and use.
Article 6 stipulates that decorators engaged in residential interior decoration activities shall not engage in the following acts without approval:
1) Erection of buildings and structures;
2) Changing the façade of the dwelling, opening doors and windows on non-load-bearing exterior walls;
3) Demolition and alteration of heating pipes and facilities;
4) Demolition and modification of gas pipelines and facilities.
The acts listed in item (a) and (b) of this article shall be approved by the competent administrative department of urban planning; (3) acts, shall be approved by the heating management unit; The act in item (4) shall be approved by the gas management unit. Noisy.
Bathroom wall tiles Actual perimeter X actual height (height is the ground backfill, and the calculation starts after hanging the aluminum gusset) = wall area. Finally, subtract the area of the door and window openings from the wall area to get your actual bathroom wall area. The kitchen wall tiles are calculated as well as those of the bathroom, but there are 2 places to pay attention to in the kitchen, first, the cabinets: >>>More
Is it better to have dark or light colors for kitchen and bathroom tiles? This can not be generalized, small area of kitchen and bathroom generally use light color, can effectively expand the field of vision, can also be matched with dark color tiles, so it is still necessary to choose according to the specific situation: >>>More
One of the clever layouts of prosperous feng shui: the front of the door should be clean. >>>More
The slip resistance of the bathroom should be good, and it needs to be selected individually. Other bricks can be used in spaces such as living rooms, which have the same effect and save materials.
If there is no power on the incoming line of the empty open caused by a short circuit, it must be that the previous level of air opening tripped, and the property management should be contacted to check the power transmission.