-
Add some talcum powder! The finer the better! 2000 filament is standard.
There are also things that you can control with less hardener. But within the range of normal drying!
Grinding can't be so clean. As long as it feels flat to the touch and there is no bump feeling, it's fine.
The needs of automobiles are adhesive to metal iron plates and aluminum plates. Low viscosity requirements for furniture. >>>More
First, polish the furniture with sandpaper, then adjust it with stone high and glue, scrape it on the furniture with a gray knife, and then polish it, apply primer and then paint.
Generally, the best wet grinding time is the hour after scraping (water grinding polishing, which can only be sprayed after the water vapor is dry). 2 to 3 hours is the best dry grinding time. After sanding, the surface dust is removed, and subsequent operations such as spraying middle paint, top coat, and overprint varnish can be sprayed. >>>More
Water-based A-brand putty is definitely better than putty, no need to mix, open the barrel and use it directly.