What to do if the blade of the kitchen knife is loose

Updated on Kitchen 2024-09-13
1 answers
  1. Anonymous users2024-01-24

    Well, use chopsticks to make a wedge, nail it through the position where the blade is clamped from the handle, and knock it into the deep, and it's OK

    If you pursue beauty, you can nail one on both sides, and symmetry is the most beautiful.

Related questions
12 answers2024-09-13

First of all, observe where it is loose, and then carry out repairs, repair them yourself or find a maintenance master. >>>More

5 answers2024-09-13

The toilet and the ground are loosened The maintenance method of the Qing Oak in the Bu Hall: 1. There is no water leakage. If the toilet is loose, but there is no leakage, it is recommended to use a utility knife to remove the original glass glue at the bottom of the toilet, and then evenly coat the glass glue at the junction between the bottom of the toilet and the ground, and wait for 24 hours to ensure that the glass glue is completely solidified before it can be used normally. >>>More

1 answers2024-09-13

Put a little white latex into the loose part, then re-smash it, and then make a small opening on the outside of the tongue and smash it into a wooden wedge.

1 answers2024-09-13

The aluminum gusset on the top of the kitchen is loose, and it is tight when gently knocked back with a tool or hand.

3 answers2024-09-13

Ball lock or what lock? Twist it after the ball lock. There is a hole, take a small screwdriver and poke it and put it back on.