-
Anonymous users2024-01-24Because stainless steel is expensive, it is difficult to process.
-
Anonymous users2024-01-23It should be the difference in processing difficulty, the best processing is plastic steel, followed by aluminum, and there are few applications of non-embroidered steel. Moreover, the stainless steel profile suitable for the shower room is also very selective, almost all of which rely on manual bending and welding, which requires relatively high technical requirements, and it will be scrapped if the welding is not good. And the other two are just riveting.
Stainless steel has the best performance, but the decoration materials made outside are not too much to really do stainless steel. From the perspective of economy, beauty and practicality, aluminum alloy is better. >>>More
If you are a one-stop production, you need a plow machine, a bending machine, a shearing machine, a laser machine, a welding joint, a stretch bending machine, and if you are a stainless steel external processing, you only need a set of cutting machines.
This is tempered glass directly formed, in the case of heat, according to the shape of the mold, after cooling, it is finalized.
Generally, aluminum alloy will not rust, because the iron content of aluminum alloy is very small, stainless steel is based on the chromium-rich oxide film formed on the surface to obtain rust resistance, if this film is constantly damaged by special damage, the metal surface will also be affected by yuba, of course, the protective film is extremely thin and strong and fine and stable in general use will not be damaged.