-
Anonymous users2024-01-24At present, there are two kinds of toilet hole spacing 380mm and 280mm, with 380mm at least 250mm away from the wall, if you feel that the distance is too large, you can use the toilet shifter, the general shift can be moved 50-100mm, but it affects the flushing effect of the toilet bowl when it is used.
-
Anonymous users2024-01-23The pit spacing of toilets is generally between 200-400, and 300 and 400 pit spacing are more common in the market.
-
Anonymous users2024-01-22The toilet has 2 holes, if it is pre-embedded, it is recommended that you first look at the toilet whether it is a front hole or a back hole The front hole is reserved for 45 cm in the middle of the hole from the wall to the drain pipe The back hole is 38 cm in the middle of the hole from the wall to the drain.
If only the 40 drain is blocked, you can use the hole of 30, but after installation, the toilet will be 10cm away from the wall, and if the bottom is not installed firmly, the toilet may shift after a long time. (The 40-pit distance toilet is used for toilets where the distance from the sewage pipe to the wall is 40cm, and if the 30-pit distance is used, the back of the toilet is not attached to the wall, and there is a 10cm distance).
Soybean oil and salad oil, better with peanut oil, will not give you olive oil is very expensive.
Generally, restaurants are composed of three parts, namely the service function area, the production function area and the auxiliary function area. 1. The service function area is a place to provide customers with meals and services, including halls and private rooms, which have been described in detail above. 2. The production functional area refers to the part that provides services for the operation of the service functional area, including the preparation room, the production room, the kitchen and the washing room, and is also an important part of the operation. >>>More
There are two main production processes of bentwood furniture: sawing processing and pressure bending forming. The sawing method has many disadvantages: a large number of wood fibers are cut, which reduces the strength of the components; The processing is complex and the finishing is difficult; The yield is low. >>>More
It doesn't seem to be. Only 300 and 400's. You can use a 300 one, but there is a slit in the back, and the toilet bowl now has a slit.