-
Anonymous users2024-01-24You put the problem in the explanation of 1 point, if the water tank is full, or to whom the box to pump water, that is, the float in the tank is out of order, you first press the float back and forth with your hand a few times, if it does not enter the water, it is the reason, otherwise you need to replace 1 set of floats, try 1 try, see if you don't have it. View the original post
It should be that the sealing ring bordering the water tank in the water tank is aging, and it will be replaced with a new one. . .
Adjust the float of the water supply valve downward, and if it doesn't work, you can only replace the water supply valve.
The main reason for the dissatisfaction of the water volume of the water tank is the problem of the drainage department in the middle, which is that the bottom seat of the drain valve is not installed or flattened if it is newly installed, and the surface is uneven caused by the aging and deformation of the diaphragm of the drain valve.
Simply buy a set of fifteen yuan and change it yourself, and you will know the structure when you buy it.
It is possible that the water sealing beat of the drain valve is stuck, and it will naturally keep ringing because the water is not reset, so the button cannot be pressed.