Toilet tank leaking What to do if you can t hold water in the tank

Updated on Toilet 2024-06-30
4 answers
  1. Anonymous users2024-01-24

    It should be that the sealing ring bordering the water tank in the water tank is aging, and it will be replaced with a new one. . .

  2. Anonymous users2024-01-23

    Oh, and the leather feet that connect the water pipes under the tank are broken.

  3. Anonymous users2024-01-22

    The leather padding used to seal the water outlet in the water tank is aged or deformed, and it will be solved under normal circumstances if you replace it.

  4. Anonymous users2024-01-21

    Find the after-sales service of the toilet manufacturer, or repair it by professional repair personnel, don't fool around.

Related questions
8 answers2024-06-30

Pull the card position of the water scoop up and down with water to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, it means that the water scoop equipment is faulty. Remember to press the ladle down a little bit, not too high. If you don't know how to disassemble it, you can dry the water directly in the water tank and clean it with dish soap or laundry detergent. >>>More

1 answers2024-06-30

This is the last time you pressed the water for too long, resulting in the plug not reset, you can press it again, just hear the snap sound to reset.

9 answers2024-06-30

The water meter has been walking, nine times out of ten is that the squatting toilet is broken, the appearance is not visible, the water directly enters the water from the water tank, you can turn off the water valve to try, the way is to reinstall or replace it all. >>>More

6 answers2024-06-30

1. Inferior material: manufacturers reduce costs and choose inferior materials. >>>More

2 answers2024-06-30

The parts in the water tank are aging, or the middle structure is broken, it is recommended to change a part that is stuck in water, or directly change the water tank, it is estimated that the parts are not easy to buy.