-
Anonymous users2024-01-24It depends on whether the floor tiles have fallen off completely, and if so, they need to be re-glued. If it doesn't fall off, but just warped, you can use a chainsaw that cuts the floor tiles to cut all the way down the warped tile joints, and you must cut wherever it is warped. Then re-glue it with cement.
-
Anonymous users2024-01-23Can only be repaired.
The floor tiles are broken, and the cement is buckled out a little, which is to dig the cement in the original position a little deeper.
Get some cement and reinstall the floor tiles.
Lift the side seams of the upturned tiles with a blade, and pour the cement into a thin soup, and pour water before pouring it. Press down with a weight after filling. It is easy to pull after two days of solidification.
Integrated ceilings? Suction up and down with a suction cup, the suction cup is the kind of hook, which is available in supermarkets.
Wash it with hot water, or wear a hat to sleep the night before, and take it down.
If the solid wood flooring is not installed well, it may lead to warping in the future, so be careful when installing. >>>More
There are many reasons for the protrusion of floor tiles, materials, processes, temperatures, etc. Or the cement used in laying is inferior cement, so that the ground base layer fails to produce strong viscosity to the brick, so that the brick warps in the process of thermal expansion and cold contraction. There is also that the floor tiles are paved side by side, the size of the gap is not properly handled (generally 2mm), and the expansion and contraction of the base layer is larger than that of the tile, which will cause the arch of the tile layer, and the warping of your balcony is likely to be due to the thermal expansion and contraction produced in winter. The treatment method is to pry up the warped floor tiles, remove the ground base, and then use high-quality 325 cement and yellow sand to lay the bricks.