How much should the toilet pipe in the bathroom be placed off the wall?

The spacing between the toilet toilet water pipe and the wall is generally 650mm, according to the sewage outlet of the installed product in the appropriate position from the wall to reserve the sewer pipe and determine the distance between the sewer pipe entrance and the ground, the depth of the pit to be reserved under the ground to install the squatting toilet is greater than the height of the squatting toilet, and the connecting rubber plug should be put into the inlet hole of the squatting toilet to prevent water leakage.

It is indicated in the architectural plan of the house.

Or measure the distance from the wall to the center of the toilet drain. Generally around 45. >>>More

The size of the sink has some minimum control, the minimum width is 550mm, and the 600mm bathroom has been reduced to about 300mm in order to save space, but even if this is done, the washbasin is not only 300mm wide, and the washbasin must be highlighted, so it is inconvenient to place things. In addition, the key is to leave a 550mm headroom size from the center of the washbasin to the walls on both sides, that is to say, there must be a headroom of 1100 to put your counter, otherwise it will be lame to use, so you can synthesize everyone's opinions. In order to save money or even avoid the washbasin, some people need a floor-to-ceiling washbasin and put soap or something. >>>More

These bricklayers know what they know, so leave it to them. For floor drains, you can learn about the non-core floor drains designed using the principle of gravity.

Toilets have in-line holes with a distance of 30 cm or 40 cm. There is also a wall row with a hole center height of 12 18 cm. It is normal to use it together