-
Anonymous users2024-01-23These bricklayers know what they know, so leave it to them. For floor drains, you can learn about the non-core floor drains designed using the principle of gravity.
The spacing between the toilet toilet water pipe and the wall is generally 650mm, according to the sewage outlet of the installed product in the appropriate position from the wall to reserve the sewer pipe and determine the distance between the sewer pipe entrance and the ground, the depth of the pit to be reserved under the ground to install the squatting toilet is greater than the height of the squatting toilet, and the connecting rubber plug should be put into the inlet hole of the squatting toilet to prevent water leakage.
The reason for the problem is the cracking of the waterproof layer, the place where the waterproof cracking, according to your description, is the position of the connection between the waterproof layer and the drain sewer pipe, caused by cracking, after the tiles around the floor drain are smashed, the leakage plugging spirit is used again to paint the waterproof layer and the drain sewer pipe wall position.
It should be a floor drain and a toilet, and the surrounding area is leaking. >>>More
The floor drain is 200mm, which can make the water on the floor of the bathroom space be discharged immediately and keep the entire bathroom space dry, but if the floor drain in the bathroom is slow, it will affect the normal use of the user. >>>More
In home life, we often encounter such a problem, the floor drain is obviously not blocked, but the water is very slow, what is the reason for this? At this time, in addition to considering the problem of ground slope, we can also remove the floor drain cover, pour water into it to see if it is fast, if it is fast, it proves that the sewer pipe is not blocked, it is the cause of the floor drain, if it is still very slow, it is the sewer blocked, find someone to pass it. >>>More