-
Anonymous users2024-01-24I don't know if you're talking about going up or down. Now I'm going to talk about each of them briefly.
The water supply is very simple, that is, the interface of the water pipe has been reserved during normal civil construction, as long as there is a triangle valve, a connecting hose can be connected.
If the toilet outlet connection is a little more particular: the first hole for the water is reserved, if it has not been done well, then you have to do it yourself, you can reserve a 11 cm hole in the ground 40 cm from the wall (wool wall), or 45 cm. After the floor tiles are pasted, use glass glue or white cement to lay a layer on the ground according to the position of the toilet, put the toilet bowl on it, and gently pat the toilet bowl to ensure that it fits perfectly, so that it can be used after a day.
I don't know if what I'm saying will help you.
If it's right, give points if you don't say it! Hehe!
-
Anonymous users2024-01-23Each toilet has 4 taps connected with a metal hose and a water pipe.
-
Anonymous users2024-01-22Send me a picture of the toilet bowl as a whole.
If you can't buy it, find someone to make one out of white iron sheet.
If the aperture of the bottom of the toilet is equal to the distance between the toilet outlet and the wall, and the error is not more than 3 cm, you can use the rubber sealing ring attached to the toilet purchase, and then glue the bottom of the toilet with glass glue.
When your toilet is installed, the spout and drain pipe may not be aligned, and water will flow out of the edge when draining. It doesn't have much impact on use. >>>More
Insert the pad of the lid into the two arrows and lock it again.
1. All this depends on whether there is a water tank toilet, and the toilet flushing toilet with a water tank is not affected by the height of the floor, because the water is stored directly in the water tank. The flush of the toilet bowl is related to the flushing method, and the siphon flushing method is much better.