-
Anonymous users2024-01-24Check the water pressure, whether there is a problem with the city's water supply, and then look at where is the water leakage, the probability of water leakage is small, it should be the water pressure problem.
After using the toilet flush, in the final analysis, it is still according to the personal hygiene situation to choose the button flush, in fact, this is completely untechnical. Generally, you only need to choose a button with a small amount of water to urinate, and if you feel that it is not easy to clean up such as stool, you can choose to press the big button or two at the same time, of course, the water bill will be more expensive. >>>More
The control valve in the tank is broken, or the zipper is off.
It should be that the rubber plug that is connected to the flush gate (that is, the button that flushes the water) is old. Sometimes, the rubber hardens due to age, cracks or deformations, and the spout is not tightened, causing the water in the tank to flow into the toilet bowl.
1. The rubber pad of the drain is broken;
2. The float valve is broken or mediated too high, higher than the overflow port, resulting in continuous water ingress, and then water flows out of the overflow port, which is more likely; >>>More
You take off the toilet tank cover, see a cylinder inside, you see that the button does not bounce up, you press it and it pops up, you press a few more times, it is easy to use, you pour the toilet cleaning things into the cleaning point to clean it can be used for a long time, remember to press vertically when pressing in the future, it is not easy to break, the usual use and maintenance is very important.