-
Anonymous users2024-01-24Balcony fence installation tips:
1. The height of the steel pipe used in the balcony fence shall not be less than 1000mm.
2. When the length of the protective railing is greater than 2000mm, the railing should be set up with columns.
3. The spacing of the vertical rods is 2000mm, and the four sides are provided with scissor supports according to the regulations. At the same time, the protective shed should be separated from the main body.
5. A 1000mm high protective railing is set around it, and the outside of the protective shed is fully enclosed with a vertical net.
Precautions for installation of balcony guardrails:
1. A qualified balcony guardrail is built, the foundation must be flat and solid, and scattered water and drainage ditches must be set around it.
2. Some balconies outside the house, then it is necessary to set up the roof, generally speaking, the roof is set up as a double-layer protective shed.
3. After erection, pay attention to the cleaning and finishing.
I have also written a lot of articles about zinc steel guardrails before, and I have made many detailed introductions to them, but this time I will simply tell you how to install zinc steel guardrails, and the precautions required for installing guardrails. Let's see how these veteran drivers of the installation led us to the installation. What are the procedures to be followed when installing? >>>More
1.Avoid bumps with sharp objects.
This is the first point to pay attention to the zinc steel guardrail, and the guardrail should be handled carefully during the handling process; The place where the zinc steel guardrail is placed should be a place where hard objects are not often touched; The ground where the guardrail material is placed should also be kept flat, and it should be ensured to be firm during installation, if it is shaky and unstable, it will deform the zinc steel balcony guardrail over time, affecting the service life of the guardrail. >>>More
1. The height of the steel pipe used in the balcony fence shall not be less than 1000mm >>>More
One is a welded finished column, that is, the 4-hole column floor is welded at one end of the column profile, and the expansion screw can be locked and fixed during installation, this method is generally more stable, and I personally recommend this kind of column; >>>More
1.Install the column first. Fix the bottom of the column with expansion screws; >>>More