-
Anonymous users2024-01-24Stuck, or without water, open the lid to take a look and try it with your hand pressing.
-
Anonymous users2024-01-23The spring or plug inside is broken, and you can replace this separately.
-
Anonymous users2024-01-22The triangular valve was closed and no water was entered. Or the water level switch is broken and there is no water ingress. There are also dirty and blocked water inlet pipes, check these.
Check the main valve for tap water first, and then open the lid of the water tank to check the upper and lower water, it is possible that the drain of the toilet has blocked the foreign object. See if the piston can be plugged, if you can't plug the water tank, it will leak, and if the water tank is not satisfied, the switch will not reach the water. It is also possible that the plug of the plugging tank is broken, or the connection with the button is loose, which will lead to the phenomenon of no water.
You mean the full water button doesn't drain? The cable can be adjusted appropriately for observation.
It's best to judge with the last picture, open the toilet tank lid and judge it yourself. After all, each brand has different insides.
It may be that the toilet is seriously clogged somewhere, and it is advisable to check the connection between the tank and the toilet, which is the only place that can be blocked. If the connection between the water tank and the toilet is blocked, it is likely that there is limescale in the water pipe, because there is a filter at the screw of the hose connecting to the toilet, you can unscrew the hose and take out the filter to remove the impurities inside.
The inside of the toilet is actually very simple, just a float, if the water does not come out, it may be that the float inside is broken, first release the water, and then buy a float to replace it.