How to solve the gap between the bathroom and the balcony and the living room

Updated on Bathroom 2024-08-09
2 answers
  1. Anonymous users2024-01-24

    This depends on the kind of drop, if it is not particularly large, the threshold stone between the bathroom and the living room can be solved, if the drop is particularly large, you can choose to backfill or level, it is very simple. As for the living room and balcony, most of them will have a certain drop, mainly the balcony is lower than the living room, this is to prevent water from invading the living room, the solution: one is to add a sliding door in the living room and the balcony, there will be a threshold, and the low place outside can be tiled, you have said that you don't want to use the sliding door, then pull the living room and the balcony together, fill the balcony flush with the living room, and then seal the balcony.

    When sealing the balcony, it is necessary to pay attention to the fact that the frame must be installed first, then the tiles, and then the glass is installed. That's probably it. If you still have any questions, you can add me.

    My name is my number, hehe. Oh me!

  2. Anonymous users2024-01-23

    What does it mean to have a gap?

Related questions
4 answers2024-08-09

Is the bathroom too high or too low?

What kind of flooring do you use in your home? If the bathroom is too high, your home is using an ordinary solid wood floor can be leveled by keel laying, if it is a laminate floor, you can level the ground, but this cost is a bit high, or you can lay a bedding treasure, but it should not be too thick, so as not to produce noise in the future. If the bathroom is too low, you can only try not to lay the keel, but the general solid wood floor is not laid keel directly laying is easy to cause problems, now only Zhejiang Lingge wood industry Tiange floor can do this, and then is to use the transition strip, in the bathroom and the living room at the door to lay the slate as a transition is also a good choice. >>>More

6 answers2024-08-09

In order to make it difficult for water to enter other rooms in the bathroom, the design requires that the floor height difference between the bathroom and other parts of the room is generally 10 20mm. There is a floor drain in the bathroom, and the floor slope floor drain. Normally, there will be no water accumulation.

1 answers2024-08-09

The door is facing the solution of the bathroom.

1. Change the direction of the door or move the position, if the wall of the bathroom is a light wall, you can remove or change the direction of the door or move the position of the door, so that the two will not be facing each other; >>>More

3 answers2024-08-09

Almost 1 centimeter! Personally!