-
Anonymous users2024-01-24How to install PVC ceiling.
The installation steps of PVC ceiling are divided into: elastic line, installation of main beam, installation of wooden keel, and panel installation.
1. Spring line. First of all, the elevation line should be popped up around the wall, and the pressure line should be fixed with cement nails at both ends of the wall, and the elastic line should be popped up around the wall according to the standard height, as the standard line of ceiling installation, and the error can be allowed to be 5mm.
2. Install the main beam.
Fix the side keel with cement nails along the elevation line, determine the keel position line, and then install the keel. (It should be noted that generally for small kitchens or bathrooms, the keel can not be installed, and the keel can be laid in the middle with a larger ceiling area.) When installing the keel, care should be taken to leave the outlet of the lighting line.
3. Install the wooden keel.
When installing the keel, it is necessary to keep the keel level around the wall. In the case of ceiling spacing, generally speaking, the ceiling is 1200 to 1500mm, and the ceiling is 900mm to 1200mm
4. Panel mounting.
Before the panel is installed, the installed keel, panel and plate should be inspected, and the installation should be carried out after meeting the requirements. The installation direction of the PVC gusset is determined according to the length of the board, and if the transverse and longitudinal materials are similar, the plate is installed in the direction of the light.
Toxic, PVC is made of polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, modifier, etc., through mixing, pressure rolling, vacuum blister and other processes. The advantages are flame retardancy, wear resistance and chemical corrosion resistance, but the biggest disadvantage is also the most fatal disadvantage is that the thermal stability is very poor, and it will emit substances that are harmful to the health of the body at high temperatures.
However, it is still better than a wooden keel, because the price is relatively cheap and affordable.
This is not a no-no. Heavy-duty lamps or ceiling fans shall not be connected with the ceiling keel, and another hanging piece shall be set on the base plate.
The ceiling materials used for the installation of plastic gussets are: 30 40 wooden keel, 15mm self-tapping screws, inch iron nails.
If the PVC board is used for the ceiling, if it is exposed to the sun, it will be brittle, aging and discolored, and it will generally be used for up to 2 years. Only polymer composite ceilings are not affected by sunlight.