-
Anonymous users2024-01-24Check the corners to see if there is any hanging paint, whether the nail holes are filled, whether the seams are treated with glue, and whether the primer is worn out. There are no particles on the plane, whether the color paint is uneven, and the paint film is thick and full. Paint process:
Brush the primer and seal the bottom, repair the ash and polish, spray the primer twice, and fine grind, spray the topcoat twice.
The normal painting process can: clean the surface, brush the primer, sand, brush the primer (optional), sand, brush the topcoat (varnish), sand, brush the topcoat (twice), basically it's OK. If the shape is complex, the above painting should be changed to spray paint (hand spray can paint). >>>More
Brush the primer first, use putty to scrape the holes and uneven places, and after drying, sand it with wood sandpaper, and then formally brush the topcoat.
The paint surface is smooth, there are no dens, and the brightness of the paint surface is guaranteed. Waterproof and moisture-resistant.
First, shovel off the old paint layer, polish with coarse sandpaper (300), scrape putty, dry it, polish it with coarse sandpaper again, and then change it to fine sandpaper (600) fine grinding, if necessary, scrape a layer of red ash (eyefill ash), and then use fine sandpaper to grind, spray primer (can spray several more layers), fine grinding after drying, spray paint (pay attention to dust), dry it. >>>More
This is not necessarily, depending on which company, which factory and your technical proficiency, in general, the salary of a painter in a large automobile factory will be higher.