The role of the panel furniture painting process

The normal painting process can: clean the surface, brush the primer, sand, brush the primer (optional), sand, brush the topcoat (varnish), sand, brush the topcoat (twice), basically it's OK. If the shape is complex, the above painting should be changed to spray paint (hand spray can paint). >>>More

1. Quality requirements for grinding of panel furniture blanks: there shall be no burrs on the surface of furniture parts, smooth edges, no unevenness, chamfering at the corners of the board surface, and it is advisable not to scrape the hands, and after grinding, there shall be no degeneration that is not in place. >>>More

Raw material board sticker, cutting, pile hole, edge banding, assembly, cleaning, packing. >>>More

Brush the primer first, use putty to scrape the holes and uneven places, and after drying, sand it with wood sandpaper, and then formally brush the topcoat.

First, shovel off the old paint layer, polish with coarse sandpaper (300), scrape putty, dry it, polish it with coarse sandpaper again, and then change it to fine sandpaper (600) fine grinding, if necessary, scrape a layer of red ash (eyefill ash), and then use fine sandpaper to grind, spray primer (can spray several more layers), fine grinding after drying, spray paint (pay attention to dust), dry it. >>>More