-
Anonymous users2024-01-241. Quality requirements for grinding of panel furniture blanks: there shall be no burrs on the surface of furniture parts, smooth edges, no unevenness, chamfering at the corners of the board surface, and it is advisable not to scrape the hands, and after grinding, there shall be no degeneration that is not in place.
2. Quality requirements for panel furniture plaster: the surface of the furniture is solid, smooth, uniform in thickness, sand is not allowed to penetrate, there can be no potholes, sand holes, pores, accumulated putty and other phenomena, the putty at the hole position must be cleaned up, and the parts that do not batch ash should be kept clean.
3. Quality requirements for primer: strictly according to the formula for paint mixing, board surface cleaning, the coating surface can not have pinholes, granularity, paint slag, uneven spraying, no sagging, no shrinkage holes, edge expansion, bubbling, etc., the coating must cover the bottom of the batch of ash.
4. Quality requirements for dry sand: the paint surface after grinding is smooth, there can be no pinholes, nail holes, no sand through the paint coating, the sand road should be straight and fine, there can be no grooves, the sand marks of the grinding machine, if there are corners, wiring, and arcs of the sand through the paint coating, the primer must be repaired and then polished.
5. Requirements for sticker parts: After grinding, the parts should be smooth and bright, sand penetrating, inorganic shadow sand marks, no sand penetrating the bottom, scratching phenomenon, and after polishing, they should be wiped clean before they can be put back into the iron frame.
6. Quality requirements for dust blowing treatment: the painted surface is clean and clean, no ash and dust particles are allowed, and the sawdust in the hole and groove must be cleaned.
7. Quality requirements for topcoat: the surface is sprayed evenly, flat and smooth, there shall be no sagging, shrinkage holes, edge expansion, bubbling, wrinkled skin, the outside of the line foot is basically the same as the plane, there is no paint abrasion, no need to spray the parts to keep clean, and the edge of the paint line is neat.
8. Quality requirements for transparent oil spraying: the surface is sprayed evenly, flat and smooth, there shall be no sagging, shrinkage holes, and no spraying parts for the rising edge, keep it clean, and the edge of the paint line is neat.
9. Polishing quality requirements: the surface of the polished plate has a mirror-like luster, and there shall be no visible polishing lines, no dust, wrinkles, bubbling and other phenomena, and the remaining wax must be wiped clean after polishing.
Raw material board sticker, cutting, pile hole, edge banding, assembly, cleaning, packing. >>>More
Paint process.
1. Do the base treatment before painting for the furniture that needs to be painted. Use coarse to fine sandpaper to repeatedly polish the surface of the furniture to make the surface of the furniture smoother; >>>More
The semi-enclosed paint process is to retain the wood rays (brown holes) of the wood itself, reflecting a sense of pure wood close to nature, so the paint surface is not polished when spraying, so that the texture of the wood is very clear, and even can be felt by touching. This kind of painting process of semi-enclosed paint has quite high requirements for painting equipment and technology. Because if the paint is not thick enough, the effect of the paint will be lost, and if the paint is too much, the characteristics of the wood itself will be lost.
Polyester varnish, varnish rubbing mess or (including antique distressing). >>>More
In home decoration, paint engineering occupies a very important part, paint construction.