How to change the toilet to a toilet when squatting in a building

Updated on Toilet 2024-08-24
2 answers
  1. Anonymous users2024-01-24

    This is very troublesome, if it is good, you have to smash the original ground and do it again.

  2. Anonymous users2024-01-23

    The ground needs to be redone, and squatting into the water is generally raised.

Related questions
3 answers2024-08-24

The squatting toilet is changed to a flush toilet, and if the waterproofing is not done well after the change, it will cause water leakage downstairs. Alteration is required to change the water pipe, to raise the water pipe to the level of the floor tiles, no matter where the water leaks, as long as it leaks from your bathroom is your responsibility.

3 answers2024-08-24

A flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, plug (inlet and outlet), float, drain knob and lever. Be sure to understand the role of each of the above components in the work. >>>More

5 answers2024-08-24

The main thing is to see if the hole spacing between the PVC pipe against the wall of the squatting toilet is enough, and if it is enough, there is no problem.

2 answers2024-08-24

The squat toilet is changed to a flush toilet, and if the waterproof is not burned after the change, it will cause water leakage downstairs. To change the rock movement, it is necessary to know that Duan Yu needs to change the water pipe, to raise the water pipe to the plane level of the floor tiles, to open the ground for maintenance, and to do a good job of waterproofing around the pipe again.

2 answers2024-08-24

It's "low in, high out".

I don't know exactly how tall ...... >>>More