What to do if the toilet flush is slow to reset

Updated on Toilet 2024-08-01
1 answers
  1. Anonymous users2024-01-24

    It's OK to change a button, but when you buy it, you should pay attention to the size of the diameter of the key, and there is the difference between a single button and a double button, I don't know how to ask again, I hope it can help you.

Related questions
5 answers2024-08-01

Slow is blocked.

See if upstairs and downstairs have the same problem? If there is, it is the problem of the main riser, which can be solved by everyone; If the upstairs and downstairs are good, it is your own, it may be dredged, or it can be removed and reinstalled. >>>More

4 answers2024-08-01

Hello, the toilet bowl you encountered is slow to drain, if you haven't used it before, you can almost certainly have a slight blockage. >>>More

26 answers2024-08-01

1. First clean the toilet bowl and drain the water in the tank (suck it out again and again with a rag and wring it out), in order to avoid dilution after the hydrochloric acid is poured in. >>>More

1 answers2024-08-01

If it's broken, change the drain valve, and see if your toilet is conjoined or split before changing.

3 answers2024-08-01

Causes and solutions for slow toilet drainage.

The toilet is generally blocked at the trap (S), you can use a 3 cm hose (because the hose is soft and hard), one end is inserted into the faucet, and the other end is inserted into the toilet trap (S), it is best to plug the trap as much as possible, and then open the faucet to rinse, and then pump the hose back and forth with your hands, it is best not to be afraid of smell, afraid of dirty, if necessary, you also need to use your hand to reach into the trap to insert the water trap (S), the time is until it is through, this is the easiest way. >>>More